Jewlery Photography Part 2
Within my last article, I went over the difficulties of photographing jewelry and exactly how difficult it is to get a consistent appear and feel. The one thing that made the most significant difference initially was using a specific lighting tent. This tent measured about 17″ x 17″ x 17″ and was foldable, so very convenient to carry from destination to place. It has LED lighting stitched in and four different color backdrops. But this wasn’t the one thing I needed. Though it provided me with a firm foundation to photograph, there were other items I necessary to do. So with https://www.amazon.com/Nikon-P610-Charger/dp/B01J4USCN8, I went returning to my client’s jewelry store to put together again. As above mentioned, the tent made a major difference and provided me with a foundation to operate from, but there have been additional factors I came across made a huge impact too.
Here’s a run down of the I did to get consistent images whenever. Firstly, I set my camera to manual mode. In this way I was able to specifically ensure nothing would change shoot to shoot. My white balance was adjusted accordingly, and that i produced a note of all my settings for future use, including just how far back my camera was from your tent etc. I actually took a picture using my iPhone to record this set up for future use. Secondly, I used a macro tube extension set. This machine enabled me to obtain really near to every piece as a way to capture all the detail as is possible. The best thing about having an extension set is I really could put it on my own zoom lens and enjoy the camera further back thus i could access the tent easier without having the camera being in terms of how. Now due to the extension set, I came across another problem. My depth of field was dramatically affected and i also had the situation of just one part of the piece being sharp, with the rest from focus. I truly had to fiddle with all the settings to remove this as best I really could, so an increased f stop number was utilized, as well as this led to the shutter being open for longer.
The tripod was essential. As was actually a remote shutter release control that I purchased. This triggered significantly better stability and eliminated the camera shake. The final thing I ensured was that we photographed in RAW format to ensure that I needed the very best quality image to work with. I found myself set along with the outcomes of my images were a whole lot better. They 86dexmpky the standard the thing is in top professional shoots naturally, however they were certainly sufficient for a small jewelry store around. This became one of many toughest projects We have done in my photographic life. I needed to regulate so lots of things to receive the desired results, and my use of Lightroom afterwards played a crucial role in developing the photos. Because my put in place became consistent, my development settings also were consistent and enabled me to use the same setting to every single photograph. This is consistency at its finest.